RosettaNet XML Message Guidelines
2C4_MG_R01_00_00_EngineeringChangeApprovalRequest.htm (17-Apr-2001 08:38)
This document has been prepared by Edifecs (http://www.edifecs.com/)
based on the Business Collaboration Framework from requirements
in conformance with the RosettaNet methodology.
1 |
1 | EngineeringChangeApprovalRequest
|
2 |
1 | |-- Change
|
3 |
0..n | | |-- AffectedItem
|
4 |
0..1 | | | |-- description.FreeFormText
|
5 |
0..1 | | | |-- disposition.FreeFormText
|
6 |
1 | | | |-- effectiveDate.DateStamp
|
7 |
1 | | | |-- item.ProductIdentification
|
8 |
0..1 | | | | |-- GlobalProductIdentifier
|
9 |
0..n | | | | |-- PartnerProductIdentification
|
10 |
1 | | | | | |-- GlobalPartnerClassificationCode
|
11 |
1 | | | | | |-- ProprietaryProductIdentifier
|
12 |
0..1 | | | | | |-- revisionIdentifier.FreeFormText
|
13 |
0..1 | | | |-- manufacturingSite.BusinessDescription
|
14 |
0..1 | | | | |-- businessName.FreeFormText
|
15 |
1 | | | | |-- GlobalBusinessIdentifier
|
16 |
1 | | | |-- MarkUp
|
17 |
0..n | | | | |-- ApprovedManufacturerListMarkUp
|
18 |
0..1 | | | | | |-- approvedManufacturerMarkUpRowNew.ApprovedManufacturerListItem
|
19 |
0..n | | | | | | |-- ApprovedSupplierListItem
|
20 |
0..1 | | | | | | | |-- description.FreeFormText
|
21 |
0..1 | | | | | | | |-- GlobalPartStatusCode
|
22 |
1 | | | | | | | |-- suppliedBy.PartnerDescription
|
23 |
1 | | | | | | | | |-- BusinessDescription
|
24 |
0..1 | | | | | | | | | |-- businessName.FreeFormText
|
25 |
1 | | | | | | | | | |-- GlobalBusinessIdentifier
|
26 |
0..1 | | | | | | | | |-- ContactInformation
|
27 |
1 | | | | | | | | | |-- contactName.FreeFormText
|
28 |
0..1 | | | | | | | | | |-- EmailAddress
|
29 |
0..1 | | | | | | | | | |-- facsimileNumber.CommunicationsNumber
|
30 |
0..1 | | | | | | | | | |-- telephoneNumber.CommunicationsNumber
|
31 |
1 |
| | | | | | | |-- GlobalPartnerClassificationCode
|
32 |
0..1 |
| | | | | | | |-- PhysicalAddress
|
33 |
0..1 |
| | | | | | | | |-- addressLine1.FreeFormText
|
34 |
0..1 |
| | | | | | | | |-- addressLine2.FreeFormText
|
35 |
0..1 |
| | | | | | | | |-- addressLine3.FreeFormText
|
36 |
0..1 |
| | | | | | | | |-- cityName.FreeFormText
|
37 |
0..1 |
| | | | | | | | |-- GlobalCountryCode
|
38 |
0..1 |
| | | | | | | | |-- GlobalLocationIdentifier
|
39 |
0..1 |
| | | | | | | | |-- NationalPostalCode
|
40 |
0..1 |
| | | | | | | | |-- postOfficeBoxIdentifier.FreeFormText
|
41 |
0..1 |
| | | | | | | | |-- regionName.FreeFormText
|
42 |
1 |
| | | | | | |-- supplierItem.ProductIdentification
|
43 |
0..1 |
| | | | | | | |-- GlobalProductIdentifier
|
44 |
0..n |
| | | | | | | |-- PartnerProductIdentification
|
45 |
1 |
| | | | | | | | |-- GlobalPartnerClassificationCode
|
46 |
1 |
| | | | | | | | |-- ProprietaryProductIdentifier
|
47 |
0..1 |
| | | | | | | | |-- revisionIdentifier.FreeFormText
|
48 |
0..1 |
| | | | | |-- description.FreeFormText
|
49 |
0..1 |
| | | | | |-- GlobalPartStatusCode
|
50 |
1 |
| | | | | |-- GlobalPreferredStatusCode
|
51 |
1 |
| | | | | |-- manufacturedBy.PartnerDescription
|
52 |
1 |
| | | | | | |-- BusinessDescription
|
53 |
0..1 |
| | | | | | | |-- businessName.FreeFormText
|
54 |
1 |
| | | | | | | |-- GlobalBusinessIdentifier
|
55 |
0..1 |
| | | | | | |-- ContactInformation
|
56 |
1 |
| | | | | | | |-- contactName.FreeFormText
|
57 |
0..1 |
| | | | | | | |-- EmailAddress
|
58 |
0..1 |
| | | | | | | |-- facsimileNumber.CommunicationsNumber
|
59 |
0..1 |
| | | | | | | |-- telephoneNumber.CommunicationsNumber
|
60 |
1 |
| | | | | | |-- GlobalPartnerClassificationCode
|
61 |
0..1 |
| | | | | | |-- PhysicalAddress
|
62 |
0..1 |
| | | | | | | |-- addressLine1.FreeFormText
|
63 |
0..1 |
| | | | | | | |-- addressLine2.FreeFormText
|
64 |
0..1 |
| | | | | | | |-- addressLine3.FreeFormText
|
65 |
0..1 |
| | | | | | | |-- cityName.FreeFormText
|
66 |
0..1 |
| | | | | | | |-- GlobalCountryCode
|
67 |
0..1 |
| | | | | | | |-- GlobalLocationIdentifier
|
68 |
0..1 |
| | | | | | | |-- NationalPostalCode
|
69 |
0..1 |
| | | | | | | |-- postOfficeBoxIdentifier.FreeFormText
|
70 |
0..1 |
| | | | | | | |-- regionName.FreeFormText
|
71 |
1 |
| | | | | |-- manufacturerItem.ProductIdentification
|
72 |
0..1 |
| | | | | | |-- GlobalProductIdentifier
|
73 |
0..n |
| | | | | | |-- PartnerProductIdentification
|
74 |
1 |
| | | | | | | |-- GlobalPartnerClassificationCode
|
75 |
1 |
| | | | | | | |-- ProprietaryProductIdentifier
|
76 |
0..1 |
| | | | | | | |-- revisionIdentifier.FreeFormText
|
77 |
1 |
| | | | | |-- ReturnCancelIdentification
|
78 |
1 |
| | | | | | |-- GlobalReturnProductInstructionCode
|
79 |
0..1 |
| | | | | | |-- maximumCancellationDays.CountableAmount
|
80 |
0..1 |
| | | | | | |-- maximumReturnableDays.CountableAmount
|
81 |
0..1 |
| | | | |-- approvedManufacturerMarkUpRowOld.ApprovedManufacturerListItem
|
82 |
0..n |
| | | | | |-- ApprovedSupplierListItem
|
83 |
0..1 |
| | | | | | |-- description.FreeFormText
|
84 |
0..1 |
| | | | | | |-- GlobalPartStatusCode
|
85 |
1 |
| | | | | | |-- suppliedBy.PartnerDescription
|
86 |
1 |
| | | | | | | |-- BusinessDescription
|
87 |
0..1 |
| | | | | | | | |-- businessName.FreeFormText
|
88 |
1 |
| | | | | | | | |-- GlobalBusinessIdentifier
|
89 |
0..1 |
| | | | | | | |-- ContactInformation
|
90 |
1 |
| | | | | | | | |-- contactName.FreeFormText
|
91 |
0..1 |
| | | | | | | | |-- EmailAddress
|
92 |
0..1 |
| | | | | | | | |-- facsimileNumber.CommunicationsNumber
|
93 |
0..1 |
| | | | | | | | |-- telephoneNumber.CommunicationsNumber
|
94 |
1 |
| | | | | | | |-- GlobalPartnerClassificationCode
|
95 |
0..1 |
| | | | | | | |-- PhysicalAddress
|
96 |
0..1 |
| | | | | | | | |-- addressLine1.FreeFormText
|
97 |
0..1 |
| | | | | | | | |-- addressLine2.FreeFormText
|
98 |
0..1 |
| | | | | | | | |-- addressLine3.FreeFormText
|
99 |
0..1 |
| | | | | | | | |-- cityName.FreeFormText
|
100 |
0..1 |
| | | | | | | | |-- GlobalCountryCode
|
101 |
0..1 |
| | | | | | | | |-- GlobalLocationIdentifier
|
102 |
0..1 |
| | | | | | | | |-- NationalPostalCode
|
103 |
0..1 |
| | | | | | | | |-- postOfficeBoxIdentifier.FreeFormText
|
104 |
0..1 |
| | | | | | | | |-- regionName.FreeFormText
|
105 |
1 |
| | | | | | |-- supplierItem.ProductIdentification
|
106 |
0..1 |
| | | | | | | |-- GlobalProductIdentifier
|
107 |
0..n |
| | | | | | | |-- PartnerProductIdentification
|
108 |
1 |
| | | | | | | | |-- GlobalPartnerClassificationCode
|
109 |
1 |
| | | | | | | | |-- ProprietaryProductIdentifier
|
110 |
0..1 |
| | | | | | | | |-- revisionIdentifier.FreeFormText
|
111 |
0..1 |
| | | | | |-- description.FreeFormText
|
112 |
0..1 |
| | | | | |-- GlobalPartStatusCode
|
113 |
1 |
| | | | | |-- GlobalPreferredStatusCode
|
114 |
1 |
| | | | | |-- manufacturedBy.PartnerDescription
|
115 |
1 |
| | | | | | |-- BusinessDescription
|
116 |
0..1 |
| | | | | | | |-- businessName.FreeFormText
|
117 |
1 |
| | | | | | | |-- GlobalBusinessIdentifier
|
118 |
0..1 |
| | | | | | |-- ContactInformation
|
119 |
1 |
| | | | | | | |-- contactName.FreeFormText
|
120 |
0..1 |
| | | | | | | |-- EmailAddress
|
121 |
0..1 |
| | | | | | | |-- facsimileNumber.CommunicationsNumber
|
122 |
0..1 |
| | | | | | | |-- telephoneNumber.CommunicationsNumber
|
123 |
1 |
| | | | | | |-- GlobalPartnerClassificationCode
|
124 |
0..1 |
| | | | | | |-- PhysicalAddress
|
125 |
0..1 |
| | | | | | | |-- addressLine1.FreeFormText
|
126 |
0..1 |
| | | | | | | |-- addressLine2.FreeFormText
|
127 |
0..1 |
| | | | | | | |-- addressLine3.FreeFormText
|
128 |
0..1 |
| | | | | | | |-- cityName.FreeFormText
|
129 |
0..1 |
| | | | | | | |-- GlobalCountryCode
|
130 |
0..1 |
| | | | | | | |-- GlobalLocationIdentifier
|
131 |
0..1 |
| | | | | | | |-- NationalPostalCode
|
132 |
0..1 |
| | | | | | | |-- postOfficeBoxIdentifier.FreeFormText
|
133 |
0..1 |
| | | | | | | |-- regionName.FreeFormText
|
134 |
1 |
| | | | | |-- manufacturerItem.ProductIdentification
|
135 |
0..1 |
| | | | | | |-- GlobalProductIdentifier
|
136 |
0..n |
| | | | | | |-- PartnerProductIdentification
|
137 |
1 |
| | | | | | | |-- GlobalPartnerClassificationCode
|
138 |
1 |
| | | | | | | |-- ProprietaryProductIdentifier
|
139 |
0..1 |
| | | | | | | |-- revisionIdentifier.FreeFormText
|
140 |
1 |
| | | | | |-- ReturnCancelIdentification
|
141 |
1 |
| | | | | | |-- GlobalReturnProductInstructionCode
|
142 |
0..1 |
| | | | | | |-- maximumCancellationDays.CountableAmount
|
143 |
0..1 |
| | | | | | |-- maximumReturnableDays.CountableAmount
|
144 |
1 |
| | | | |-- GlobalMarkUpTypeCode
|
145 |
0..n |
| | | |-- AttachmentMarkUp
|
146 |
0..1 |
| | | | |-- attachmentMarkUpRowNew.Attachment
|
147 |
0..1 |
| | | | | |-- description.FreeFormText
|
148 |
0..1 |
| | | | | |-- GlobalAttachmentDescriptionCode
|
149 |
1 |
| | | | | |-- GlobalMimeTypeQualifierCode
|
150 |
1 |
| | | | | |-- UniversalResourceIdentifier
|
151 |
0..1 |
| | | | |-- attachmentMarkUpRowOld.Attachment
|
152 |
0..1 |
| | | | | |-- description.FreeFormText
|
153 |
0..1 |
| | | | | |-- GlobalAttachmentDescriptionCode
|
154 |
1 |
| | | | | |-- GlobalMimeTypeQualifierCode
|
155 |
1 |
| | | | | |-- UniversalResourceIdentifier
|
156 |
1 |
| | | | |-- GlobalMarkUpTypeCode
|
157 |
0..n |
| | | |-- BillOfMaterialMarkUp
|
158 |
0..1 |
| | | | |-- billOfMaterialMarkUpRowNew.BillOfMaterialItem
|
159 |
0..n |
| | | | | |-- AlternateItem
|
160 |
1 |
| | | | | | |-- GlobalPreferredStatusCode
|
161 |
1 |
| | | | | | |-- item.ProductIdentification
|
162 |
0..1 |
| | | | | | | |-- GlobalProductIdentifier
|
163 |
0..n |
| | | | | | | |-- PartnerProductIdentification
|
164 |
1 |
| | | | | | | | |-- GlobalPartnerClassificationCode
|
165 |
1 |
| | | | | | | | |-- ProprietaryProductIdentifier
|
166 |
0..1 |
| | | | | | | | |-- revisionIdentifier.FreeFormText
|
167 |
0..1 |
| | | | | |-- description.FreeFormText
|
168 |
1 |
| | | | | |-- GlobalBillOfMaterialTypeCode
|
169 |
0..1 |
| | | | | |-- GlobalProductQuantityTypeCode
|
170 |
1 |
| | | | | |-- item.ProductIdentification
|
171 |
0..1 |
| | | | | | |-- GlobalProductIdentifier
|
172 |
0..n |
| | | | | | |-- PartnerProductIdentification
|
173 |
1 |
| | | | | | | |-- GlobalPartnerClassificationCode
|
174 |
1 |
| | | | | | | |-- ProprietaryProductIdentifier
|
175 |
0..1 |
| | | | | | | |-- revisionIdentifier.FreeFormText
|
176 |
0..1 |
| | | | | |-- ProductQuantity
|
177 |
0..1 |
| | | | | |-- ProprietarySequenceIdentifier
|
178 |
0..n |
| | | | | |-- referenceDesignatorName.FreeFormText
|
179 |
1 |
| | | | | |-- SerialSpecification
|
180 |
1 |
| | | | | | |-- isSerializationRequired.AffirmationIndicator
|
181 |
0..n |
| | | | | | |-- SerialNumberIdentification
|
182 |
1 |
| | | | | | | |-- ProprietarySerialIdentifier
|
183 |
1 |
| | | | | | | |-- SequenceNumber
|
184 |
0..n |
| | | | | | |-- SerialNumberRange
|
185 |
1 |
| | | | | | | |-- firstSerialNumber.ProprietarySerialIdentifier
|
186 |
1 |
| | | | | | | |-- Increment
|
187 |
1 |
| | | | | | | |-- lastSerialNumber.ProprietarySerialIdentifier
|
188 |
1 |
| | | | | | | |-- SequenceNumber
|
189 |
0..1 |
| | | | |-- billOfMaterialMarkUpRowOld.BillOfMaterialItem
|
190 |
0..n |
| | | | | |-- AlternateItem
|
191 |
1 |
| | | | | | |-- GlobalPreferredStatusCode
|
192 |
1 |
| | | | | | |-- item.ProductIdentification
|
193 |
0..1 |
| | | | | | | |-- GlobalProductIdentifier
|
194 |
0..n |
| | | | | | | |-- PartnerProductIdentification
|
195 |
1 |
| | | | | | | | |-- GlobalPartnerClassificationCode
|
196 |
1 |
| | | | | | | | |-- ProprietaryProductIdentifier
|
197 |
0..1 |
| | | | | | | | |-- revisionIdentifier.FreeFormText
|
198 |
0..1 |
| | | | | |-- description.FreeFormText
|
199 |
1 |
| | | | | |-- GlobalBillOfMaterialTypeCode
|
200 |
0..1 |
| | | | | |-- GlobalProductQuantityTypeCode
|
201 |
1 |
| | | | | |-- item.ProductIdentification
|
202 |
0..1 |
| | | | | | |-- GlobalProductIdentifier
|
203 |
0..n |
| | | | | | |-- PartnerProductIdentification
|
204 |
1 |
| | | | | | | |-- GlobalPartnerClassificationCode
|
205 |
1 |
| | | | | | | |-- ProprietaryProductIdentifier
|
206 |
0..1 |
| | | | | | | |-- revisionIdentifier.FreeFormText
|
207 |
0..1 |
| | | | | |-- ProductQuantity
|
208 |
0..1 |
| | | | | |-- ProprietarySequenceIdentifier
|
209 |
0..n |
| | | | | |-- referenceDesignatorName.FreeFormText
|
210 |
1 |
| | | | | |-- SerialSpecification
|
211 |
1 |
| | | | | | |-- isSerializationRequired.AffirmationIndicator
|
212 |
0..n |
| | | | | | |-- SerialNumberIdentification
|
213 |
1 |
| | | | | | | |-- ProprietarySerialIdentifier
|
214 |
1 |
| | | | | | | |-- SequenceNumber
|
215 |
0..n |
| | | | | | |-- SerialNumberRange
|
216 |
1 |
| | | | | | | |-- firstSerialNumber.ProprietarySerialIdentifier
|
217 |
1 |
| | | | | | | |-- Increment
|
218 |
1 |
| | | | | | | |-- lastSerialNumber.ProprietarySerialIdentifier
|
219 |
1 |
| | | | | | | |-- SequenceNumber
|
220 |
1 |
| | | | |-- GlobalMarkUpTypeCode
|
221 |
1 |
| | |-- obsoleteDate.DateStamp
|
222 |
0..1 |
| | |-- RevisionIdentification
|
223 |
1 |
| | | |-- newRevision.ProductIdentification
|
224 |
0..1 |
| | | | |-- GlobalProductIdentifier
|
225 |
0..n |
| | | | |-- PartnerProductIdentification
|
226 |
1 |
| | | | | |-- GlobalPartnerClassificationCode
|
227 |
1 |
| | | | | |-- ProprietaryProductIdentifier
|
228 |
0..1 |
| | | | | |-- revisionIdentifier.FreeFormText
|
229 |
1 |
| | | |-- oldRevision.ProductIdentification
|
230 |
0..1 |
| | | | |-- GlobalProductIdentifier
|
231 |
0..n |
| | | | |-- PartnerProductIdentification
|
232 |
1 |
| | | | | |-- GlobalPartnerClassificationCode
|
233 |
1 |
| | | | | |-- ProprietaryProductIdentifier
|
234 |
0..1 |
| | | | | |-- revisionIdentifier.FreeFormText
|
235 |
1 |
| |-- Approval
|
236 |
1 |
| | |-- GlobalApproverTypeCode
|
237 |
0..1 |
| | |-- requestedApprovalBy.PartnerDescription
|
238 |
1 |
| | | |-- BusinessDescription
|
239 |
0..1 |
| | | | |-- businessName.FreeFormText
|
240 |
1 |
| | | | |-- GlobalBusinessIdentifier
|
241 |
1 |
| | | |-- ContactInformation
|
242 |
1 |
| | | | |-- contactName.FreeFormText
|
243 |
0..1 |
| | | | |-- EmailAddress
|
244 |
0..1 |
| | | | |-- facsimileNumber.CommunicationsNumber
|
245 |
0..1 |
| | | | |-- telephoneNumber.CommunicationsNumber
|
246 |
1 |
| | | |-- GlobalPartnerClassificationCode
|
247 |
0..1 |
| | | |-- PhysicalAddress
|
248 |
0..1 |
| | | | |-- addressLine1.FreeFormText
|
249 |
0..1 |
| | | | |-- addressLine2.FreeFormText
|
250 |
0..1 |
| | | | |-- addressLine3.FreeFormText
|
251 |
0..1 |
| | | | |-- cityName.FreeFormText
|
252 |
0..1 |
| | | | |-- GlobalCountryCode
|
253 |
0..1 |
| | | | |-- GlobalLocationIdentifier
|
254 |
0..1 |
| | | | |-- NationalPostalCode
|
255 |
0..1 |
| | | | |-- postOfficeBoxIdentifier.FreeFormText
|
256 |
0..1 |
| | | | |-- regionName.FreeFormText
|
257 |
0..1 |
| |-- Attachment
|
258 |
0..1 |
| | |-- description.FreeFormText
|
259 |
0..1 |
| | |-- GlobalAttachmentDescriptionCode
|
260 |
1 |
| | |-- GlobalMimeTypeQualifierCode
|
261 |
1 |
| | |-- UniversalResourceIdentifier
|
262 |
0..1 |
| |-- changeOriginatedBy.PartnerDescription
|
263 |
1 |
| | |-- BusinessDescription
|
264 |
0..1 |
| | | |-- businessName.FreeFormText
|
265 |
1 |
| | | |-- GlobalBusinessIdentifier
|
266 |
0..1 |
| | |-- ContactInformation
|
267 |
1 |
| | | |-- contactName.FreeFormText
|
268 |
0..1 |
| | | |-- EmailAddress
|
269 |
0..1 |
| | | |-- facsimileNumber.CommunicationsNumber
|
270 |
0..1 |
| | | |-- telephoneNumber.CommunicationsNumber
|
271 |
1 |
| | |-- GlobalPartnerClassificationCode
|
272 |
0..1 |
| | |-- PhysicalAddress
|
273 |
0..1 |
| | | |-- addressLine1.FreeFormText
|
274 |
0..1 |
| | | |-- addressLine2.FreeFormText
|
275 |
0..1 |
| | | |-- addressLine3.FreeFormText
|
276 |
0..1 |
| | | |-- cityName.FreeFormText
|
277 |
0..1 |
| | | |-- GlobalCountryCode
|
278 |
0..1 |
| | | |-- GlobalLocationIdentifier
|
279 |
0..1 |
| | | |-- NationalPostalCode
|
280 |
0..1 |
| | | |-- postOfficeBoxIdentifier.FreeFormText
|
281 |
0..1 |
| | | |-- regionName.FreeFormText
|
282 |
1 |
| |-- changeOriginationDate.DateStamp
|
283 |
0..1 |
| |-- changeOwnedBy.PartnerDescription
|
284 |
1 |
| | |-- BusinessDescription
|
285 |
0..1 |
| | | |-- businessName.FreeFormText
|
286 |
1 |
| | | |-- GlobalBusinessIdentifier
|
287 |
0..1 |
| | |-- ContactInformation
|
288 |
1 |
| | | |-- contactName.FreeFormText
|
289 |
0..1 |
| | | |-- EmailAddress
|
290 |
0..1 |
| | | |-- facsimileNumber.CommunicationsNumber
|
291 |
0..1 |
| | | |-- telephoneNumber.CommunicationsNumber
|
292 |
1 |
| | |-- GlobalPartnerClassificationCode
|
293 |
0..1 |
| | |-- PhysicalAddress
|
294 |
0..1 |
| | | |-- addressLine1.FreeFormText
|
295 |
0..1 |
| | | |-- addressLine2.FreeFormText
|
296 |
0..1 |
| | | |-- addressLine3.FreeFormText
|
297 |
0..1 |
| | | |-- cityName.FreeFormText
|
298 |
0..1 |
| | | |-- GlobalCountryCode
|
299 |
0..1 |
| | | |-- GlobalLocationIdentifier
|
300 |
0..1 |
| | | |-- NationalPostalCode
|
301 |
0..1 |
| | | |-- postOfficeBoxIdentifier.FreeFormText
|
302 |
0..1 |
| | | |-- regionName.FreeFormText
|
303 |
0..1 |
| |-- changeReason.FreeFormText
|
304 |
0..1 |
| |-- description.FreeFormText
|
305 |
0..1 |
|-- description.FreeFormText
|
306 |
1 |
|-- EngineeringChangeDocumentIdentification
|
307 |
1 |
| |-- engineeringChangeApprovalIdentifier.ProprietaryReferenceIdentifier
|
308 |
1 |
|-- GlobalUrgencyCode
|
309 |
0..1 |
|-- ImplementationPlan
|
310 |
1 |
| |-- requestedImplementationDate.DateStamp
|
311 |
0..1 |
|-- requestedResponseDate.DateStamp
|
312 |
1 |
fromRole.PartnerRoleDescription
|
313 |
1 |
|-- ContactInformation
|
314 |
1 |
| |-- contactName.FreeFormText
|
315 |
1 |
| |-- EmailAddress
|
316 |
0..1 |
| |-- facsimileNumber.CommunicationsNumber
|
317 |
1 |
| |-- telephoneNumber.CommunicationsNumber
|
318 |
1 |
|-- GlobalPartnerRoleClassificationCode
|
319 |
1 |
|-- PartnerDescription
|
320 |
1 |
| |-- BusinessDescription
|
321 |
1 |
| | |-- GlobalBusinessIdentifier
|
322 |
1 |
| | |-- GlobalSupplyChainCode
|
323 |
1 |
| |-- GlobalPartnerClassificationCode
|
324 |
1 |
GlobalDocumentFunctionCode
|
325 |
1 |
thisDocumentGenerationDateTime.DateTimeStamp
|
326 |
1 |
thisDocumentIdentifier.ProprietaryDocumentIdentifier
|
327 |
1 |
toRole.PartnerRoleDescription
|
328 |
0..1 |
|-- ContactInformation
|
329 |
1 |
| |-- contactName.FreeFormText
|
330 |
1 |
| |-- EmailAddress
|
331 |
0..1 |
| |-- facsimileNumber.CommunicationsNumber
|
332 |
1 |
| |-- telephoneNumber.CommunicationsNumber
|
333 |
1 |
|-- GlobalPartnerRoleClassificationCode
|
334 |
1 |
|-- PartnerDescription
|
335 |
1 |
| |-- BusinessDescription
|
336 |
1 |
| | |-- GlobalBusinessIdentifier
|
337 |
1 |
| | |-- GlobalSupplyChainCode
|
338 |
1 |
| |-- GlobalPartnerClassificationCode
|
5: disposition.FreeFormText |
---|
User Notes: Describes the settlement or outcome of the item, part or assembly after processing (i.e. Engineering Change Request). |
7: item.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
10: GlobalPartnerClassificationCode |
---|
Entity Instances |
17: ApprovedManufacturerListMarkUp |
---|
Constraint: If GlobalMarkUpTypeCode = 'Add' then approvedManufacturerMarkUpRowNew is required and approvedManufacturerMarkUpRowOld should not be included. If GlobalMarkUpTypeCode = 'Modify' then approvedManufacturerMarkUpRowNew and approvedManufacturerMarkUpRowOld are both required. If GlobalMarkUpTypeCode = 'Delete' then approvedManufacturerMarkUpRowOld is required and approvedManufacturerMarkUpRowNew should not be included. |
21: GlobalPartStatusCode |
---|
Entity Instances |
31: GlobalPartnerClassificationCode |
---|
Entity Instances |
32: PhysicalAddress |
---|
Constraint: If PhysicalAddress is used then at least one associated element (e.g. GlobalLocationIdentifier or GlobalCountryCode) is required. |
37: GlobalCountryCode |
---|
Entity Instances |
42: supplierItem.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
45: GlobalPartnerClassificationCode |
---|
Entity Instances |
49: GlobalPartStatusCode |
---|
Entity Instances |
50: GlobalPreferredStatusCode |
---|
Entity Instances |
60: GlobalPartnerClassificationCode |
---|
Entity Instances |
61: PhysicalAddress |
---|
Constraint: If PhysicalAddress is used then at least one associated element (e.g. GlobalLocationIdentifier or GlobalCountryCode) is required. |
66: GlobalCountryCode |
---|
Entity Instances |
71: manufacturerItem.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
74: GlobalPartnerClassificationCode |
---|
Entity Instances |
78: GlobalReturnProductInstructionCode |
---|
Entity Instances |
84: GlobalPartStatusCode |
---|
Entity Instances |
94: GlobalPartnerClassificationCode |
---|
Entity Instances |
95: PhysicalAddress |
---|
Constraint: If PhysicalAddress is used then at least one associated element (e.g. GlobalLocationIdentifier or GlobalCountryCode) is required. |
100: GlobalCountryCode |
---|
Entity Instances |
105: supplierItem.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
108: GlobalPartnerClassificationCode |
---|
Entity Instances |
112: GlobalPartStatusCode |
---|
Entity Instances |
113: GlobalPreferredStatusCode |
---|
Entity Instances |
123: GlobalPartnerClassificationCode |
---|
Entity Instances |
124: PhysicalAddress |
---|
Constraint: If PhysicalAddress is used then at least one associated element (e.g. GlobalLocationIdentifier or GlobalCountryCode) is required. |
129: GlobalCountryCode |
---|
Entity Instances |
134: manufacturerItem.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
137: GlobalPartnerClassificationCode |
---|
Entity Instances |
141: GlobalReturnProductInstructionCode |
---|
Entity Instances |
144: GlobalMarkUpTypeCode |
---|
Entity Instances |
145: AttachmentMarkUp |
---|
Constraint: If GlobalMarkUpTypeCode = 'Add' then attachmentMarkUpRowNew is required and attachmentMarkUpRowOld should not be included. If GlobalMarkUpTypeCode = 'Modify' then attachmentMarkUpRowNew and attachmentMarkUpRowOld are both required. If GlobalMarkUpTypeCode = 'Delete' then attachmentMarkUpRowOld is required and attachmentMarkUpRowNew should not be included. |
147: description.FreeFormText |
---|
User Notes: This field may be used to supply the file name of the attachment. |
148: GlobalAttachmentDescriptionCode |
---|
Entity Instances |
149: GlobalMimeTypeQualifierCode |
---|
Entity Instances |
150: UniversalResourceIdentifier |
---|
Constraint: This value MUST follow the Content-ID reference syntax per RFC 2111 and MUST refer to the MIME Content-ID of the attachment. |
User Notes: Reference to the content ID of the attached document. |
152: description.FreeFormText |
---|
User Notes: This field may be used to supply the file name of the attachment. |
153: GlobalAttachmentDescriptionCode |
---|
Entity Instances |
154: GlobalMimeTypeQualifierCode |
---|
Entity Instances |
155: UniversalResourceIdentifier |
---|
Constraint: This value MUST follow the Content-ID reference syntax per RFC 2111 and MUST refer to the MIME Content-ID of the attachment. |
User Notes: Reference to the content ID of the attached document. |
156: GlobalMarkUpTypeCode |
---|
Entity Instances |
157: BillOfMaterialMarkUp |
---|
Constraint: If GlobalMarkUpTypeCode = 'Add' then billOfMaterialMarkUpRowNew is required and billOfMaterialMarkUpRowOld should not be included. If GlobalMarkUpTypeCode = 'Modify' then billOfMaterialMarkUpRowNew and billOfMaterialMarkUpRowOld are both required. If GlobalMarkUpTypeCode = 'Delete' then billOfMaterialMarkUpRowOld is required and billOfMaterialMarkUpRowNew should not be included. |
160: GlobalPreferredStatusCode |
---|
Entity Instances |
161: item.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
164: GlobalPartnerClassificationCode |
---|
Entity Instances |
168: GlobalBillOfMaterialTypeCode |
---|
Entity Instances |
169: GlobalProductQuantityTypeCode |
---|
Entity Instances |
170: item.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
173: GlobalPartnerClassificationCode |
---|
Entity Instances |
179: SerialSpecification |
---|
Constraint: If isSerializationRequired.AffirmationIndicator = 'Yes' then at least one occurrence of SerialNumberidentification or SerialNumberRange is required. |
191: GlobalPreferredStatusCode |
---|
Entity Instances |
192: item.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
195: GlobalPartnerClassificationCode |
---|
Entity Instances |
199: GlobalBillOfMaterialTypeCode |
---|
Entity Instances |
200: GlobalProductQuantityTypeCode |
---|
Entity Instances |
201: item.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
204: GlobalPartnerClassificationCode |
---|
Entity Instances |
210: SerialSpecification |
---|
Constraint: If isSerializationRequired.AffirmationIndicator = 'Yes' then at least one occurrence of SerialNumberidentification or SerialNumberRange is required. |
220: GlobalMarkUpTypeCode |
---|
Entity Instances |
223: newRevision.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
226: GlobalPartnerClassificationCode |
---|
Entity Instances |
229: oldRevision.ProductIdentification |
---|
Constraint: At least one of 'GlobalProductIdentifier' or 'PartnerProductIdentification' is mandatory. |
232: GlobalPartnerClassificationCode |
---|
Entity Instances |
236: GlobalApproverTypeCode |
---|
Entity Instances |
246: GlobalPartnerClassificationCode |
---|
Entity Instances |
247: PhysicalAddress |
---|
Constraint: If PhysicalAddress is used then at least one associated element (e.g. GlobalLocationIdentifier or GlobalCountryCode) is required. |
252: GlobalCountryCode |
---|
Entity Instances |
258: description.FreeFormText |
---|
User Notes: This field may be used to supply the file name of the attachment. |
259: GlobalAttachmentDescriptionCode |
---|
Entity Instances |
260: GlobalMimeTypeQualifierCode |
---|
Entity Instances |
261: UniversalResourceIdentifier |
---|
Constraint: This value MUST follow the Content-ID reference syntax per RFC 2111 and MUST refer to the MIME Content-ID of the attachment. |
User Notes: Reference to the content ID of the attached document. |
271: GlobalPartnerClassificationCode |
---|
Entity Instances |
272: PhysicalAddress |
---|
Constraint: If PhysicalAddress is used then at least one associated element (e.g. GlobalLocationIdentifier or GlobalCountryCode) is required. |
277: GlobalCountryCode |
---|
Entity Instances |
292: GlobalPartnerClassificationCode |
---|
Entity Instances |
293: PhysicalAddress |
---|
Constraint: If PhysicalAddress is used then at least one associated element (e.g. GlobalLocationIdentifier or GlobalCountryCode) is required. |
298: GlobalCountryCode |
---|
Entity Instances |
308: GlobalUrgencyCode |
---|
Entity Instances |
318: GlobalPartnerRoleClassificationCode |
---|
Entity Instances |
322: GlobalSupplyChainCode |
---|
Entity Instances |
323: GlobalPartnerClassificationCode |
---|
Entity Instances |
324: GlobalDocumentFunctionCode |
---|
Entity Instances |
333: GlobalPartnerRoleClassificationCode |
---|
Entity Instances |
337: GlobalSupplyChainCode |
---|
Entity Instances |
338: GlobalPartnerClassificationCode |
---|
Entity Instances |
Name |
Definition |
---|---|
description |
A description of a process, thing, action, etc. |
disposition |
Final settlement or outcome of a process. |
effectiveDate |
The date information or an activity becomes effective. |
item |
A finished good, part or assembly |
revisionIdentifier |
Free form text that identifies a revision to a proprietary serial number. |
manufacturingSite |
The location where a part or assembly is manufactured. |
businessName |
The name of a business entity. |
approvedManufacturerMarkUpRowNew |
Describes specifications for an ApprovedManufacturerList after a proposed engineering change. |
suppliedBy |
The party who supplies an item, part or assembly. |
contactName |
Name of the contact person(s) within the organization. |
facsimileNumber |
The numerical schema designed to achieve contact via facsimile. |
telephoneNumber |
The numerical schema designed to achieve contact via telephone. |
addressLine1 |
The first line of a physical address. |
addressLine2 |
The second line of a physical address. |
addressLine3 |
The third line of a physical address. |
cityName |
The name of a city. |
postOfficeBoxIdentifier |
The proprietary identity of a physical address, located at a post office, designed solely to accept and receive mail. |
regionName |
The name of a state or province within a country. |
supplierItem |
Item information described from the perspective of the supplier. |
manufacturedBy |
The party who creates, processes or produces goods especially in large quantities and by means of industrial machines. |
manufacturerItem |
Item information described from the perspective of the manufacturer. |
maximumCancellationDays |
The maximum number of days after an order is placed that an item is still cancelable before shipment. |
maximumReturnableDays |
The maximum number of days after an order is received that an item is still returnable. |
approvedManufacturerMarkUpRowOld |
Describes specifications for an ApprovedManufacturerList prior to a proposed engineering change. |
attachmentMarkUpRowNew |
Describes specifications for an Attachment after a proposed engineering change. |
attachmentMarkUpRowOld |
Describes specifications for an Attachment prior to a proposed engineering change. |
billOfMaterialMarkUpRowNew |
Describes specifications for a BillOfMaterial after a proposed engineering change. |
referenceDesignatorName |
Identifies a single instance of a component. Normally referenceDesignator is alphabetic, graphically on the schematic and is used in the electrical interconnect description. |
isSerializationRequired |
Indicates whether serial numbers must be enumerated. |
firstSerialNumber |
The first or beginning serial number in a range of serial numbers. |
lastSerialNumber |
The last or ending serial number in a range of serial numbers. |
billOfMaterialMarkUpRowOld |
Describes specifications for a BillOfMaterial prior to a proposed engineering change. |
obsoleteDate |
The date an item, part or revision becomes obsolete. |
newRevision |
Details regarding an item, assembly or process after a proposed change. |
oldRevision |
Details regarding an item, assembly or process prior to a proposed change. |
requestedApprovalBy |
The party who has been requested to approve a request. |
changeOriginatedBy |
The party who originates a proposed change. |
changeOriginationDate |
The date a proposed change is originated. |
changeOwnedBy |
The party who owns or who is assigned responsibility for a proposed change. |
changeReason |
The reason for a proposed change. |
engineeringChangeApprovalIdentifier |
The proprietary unique identification number that represents an approved engineering change request. |
requestedImplementationDate |
The date an implementation activity is requested to occur. |
requestedResponseDate |
The date for which a response has been requested to be transmitted. |
fromRole |
The role initiating a business document exchange. |
thisDocumentGenerationDateTime |
The date-time stamp indicating when this document was generated. |
thisDocumentIdentifier |
Unique tracking identification number that identifies the business document being sent. |
toRole |
The role receiving the document in a business document exchange. |
Name |
Definition |
---|---|
EngineeringChangeApprovalRequest |
The collection of business properties that allows a change review forum to request approval for an engineering change from the decision stakeholder. |
Change |
The collection of business properties that describe or define all the engineering changes which are applicable for a specific object. |
AffectedItem |
The collection of business properties that identify and describe the items affected by an engineering change. |
ProductIdentification |
The collection of business properties that describe proprietary and global identifier information regarding a product. |
PartnerProductIdentification |
The collection of business properties that describe proprietary part information. |
BusinessDescription |
The collection of business properties that describe a business identity and location. |
MarkUp |
The collection of business properties that describe the nature and type of revisions to be made in an engineering change. |
ApprovedManufacturerListMarkUp |
The collection of business properties that describe the nature and type of revisions to be made to an ApprovedManufacturerList. |
ApprovedManufacturerListItem |
The collection of business properties that identifies all the properties of the manufacturer and it's item or part that is approved by the Change Review Forum. |
ApprovedSupplierListItem |
The collection of business properties that identifies all the properties of the supplier and it's item or part that is approved by the Change Review Forum. |
PartnerDescription |
The collection of business properties that describe a business partners' identity and their function in a supply chain. |
ContactInformation |
The collection of business properties that provide communication and address information for contacting a person, organization or business. |
PhysicalAddress |
The actual physical location of an entity as prescribed by local postal authorities, including country identification as it relates to the party or a product. |
ReturnCancelIdentification |
The collection of business properties that describe whether an order for an item, part or assembly is eligible for return or cancellation. |
AttachmentMarkUp |
The collection of business properties that describe the nature and type of revisions to be made to an Attachment. |
Attachment |
A business property that describes additional information regarding a product or process. |
BillOfMaterialMarkUp |
The collection of business properties that describe the nature and type of revisions to be made to a BillOfMaterials. |
BillOfMaterialItem |
The collection of business properties that describe an assembly, kit or single item. It may also be used to describe "phantom" parts. |
AlternateItem |
The collection of business properties that describe a functional identical or comparable part that may be used in place of a primary or main part. |
SerialSpecification |
The collection of business properties that describe serial number data used to uniquely identify a finished product. |
SerialNumberIdentification |
The collection of business properties that describe a collection of non-sequential serial numbers. |
SerialNumberRange |
The collection of business properties that describe a collection of sequential serial numbers. |
RevisionIdentification |
The collection of business properties that describe the details of an item, assembly or process prior to and subsequent to a proposed revision. |
Approval |
The collection of business properties that describe the approver, status and date in a process which requires a formal sign-off before that process may proceed. |
EngineeringChangeDocumentIdentification |
The collection of business properties that describe unique references used to identify documents during the lifetime of the Engineering Change cycle. |
ImplementationPlan |
The collection of business properties that describe the plan for implementing an Engineering Change Order. |
PartnerRoleDescription |
The collection of business properties that describe a business partners' role in a partner interface process. |
Name |
Definition |
Data Type |
Min |
Max |
Representation |
---|---|---|---|---|---|
FreeFormText |
Unformatted text. |
String |
1 |
|
|
DateStamp |
Specifies a specific date. Date stamp based on the ISO 8601 specification. The "Z" following the day identifier (DD) is used to indicate Coordinated Universal Time. Informal format: CCYYMMDDZ |
Date |
9 |
9 |
9(8)X |
GlobalProductIdentifier |
Global unique product identifier. RosettaNet has adopted the Global Trade Identification Number (GTIN). |
String |
14 |
14 |
9(14) |
GlobalPartnerClassificationCode |
Code identifying a partner's function in the supply chain. |
String |
1 |
|
|
ProprietaryProductIdentifier |
An internal identifier used to identify a product. |
String |
1 |
|
|
GlobalBusinessIdentifier |
A unique business identifier. The DUNS number is specified by RosettaNet. |
Integer |
9 |
9 |
9(9) |
GlobalPartStatusCode |
A unique identifier specifying the status of an item or assembly. |
String |
1 |
|
|
EmailAddress |
Electronic mail address. |
String |
1 |
|
|
CommunicationsNumber |
The electro-technical communication number, e.g., telephone number, facsimile number, pager number. |
String |
1 |
30 |
X(30) |
GlobalCountryCode |
Code identifying the two character country code specified in ISO 3166-1993. |
String |
2 |
2 |
X(2) |
GlobalLocationIdentifier |
Location uniquely identified by the DUNS +4 number. |
Integer |
13 |
13 |
9(13) |
NationalPostalCode |
Code identifying geographic location as specified by a national postal code. |
String |
1 |
9 |
X(9) |
GlobalPreferredStatusCode |
Code identifying the status of an approved product. |
String |
1 |
|
|
GlobalReturnProductInstructionCode |
Code identifying the special instruction of the part that shows the part can be cancelled after order or returned to the manufacturer. |
String |
1 |
|
|
CountableAmount |
Dimensionless magnitude, e.g. number of products. |
PositiveInteger |
1 |
15 |
9(15) |
GlobalMarkUpTypeCode |
Code identifying the type of mark up. |
String |
1 |
|
|
GlobalAttachmentDescriptionCode |
Code identifying the type of product attachment, e.g. assembly instructions, block diagrams, test requirements, etc. |
String |
1 |
|
|
GlobalMimeTypeQualifierCode |
The MIME type. Refer to http://www.iana.org for a list of types. |
String |
1 |
|
|
UniversalResourceIdentifier |
A network-centric identifier that provides the identity of a resource. |
String |
1 |
|
|
GlobalBillOfMaterialTypeCode |
Code identifying the type of product or item on the Bill Of Material. |
String |
1 |
|
|
GlobalProductQuantityTypeCode |
Code identifying the type of the quantity needed for assemblies or setting up. |
String |
1 |
|
|
ProductQuantity |
A quantity specifying the number of product units. |
Real |
1 |
|
|
ProprietarySequenceIdentifier |
A proprietary identifier which identifies the order of a designated element within a specified set. |
String |
1 |
|
|
AffirmationIndicator |
Used to indicate "yes", "no" statements. |
String |
2 |
3 |
|
ProprietarySerialIdentifier |
Unique serial identifier assigned to the product. |
String |
1 |
|
|
SequenceNumber |
A positive integer which identifies the order of a designated element within a specified set. |
String |
1 |
|
|
Increment |
A factor which when applied to a serial number in a given range will yield the next serial number in that range. |
String |
1 |
|
|
GlobalApproverTypeCode |
Code identifying the type of approval. |
String |
1 |
|
|
ProprietaryReferenceIdentifier |
A unique reference identifier for goods, services or business documents. |
String |
1 |
255 |
|
GlobalUrgencyCode |
Code identifying the requirement for immediate action. |
String |
1 |
|
|
GlobalPartnerRoleClassificationCode |
Code identifying a party's role in the supply chain. |
String |
1 |
|
|
GlobalSupplyChainCode |
Code identifying the supply chain for the partner's function. |
String |
1 |
|
|
GlobalDocumentFunctionCode |
Code identifying the function of a document as either a request or a response. |
String |
1 |
|
|
DateTimeStamp |
Specifies an instance in time. Based on the ISO 8601 specification where "CC" represents the century, "YY" the year, "MM" the month and "DD" the day. The letter "T" is the date/time separator and "hh", "mm", "ss.sss" represent hour, minute and second respectively. This representation is immediately followed by a "Z" to indicate Coordinated Universal Time. Informal format: CCYYMMDDThhmmss.sssZ |
DateTime |
13 |
20 |
9(8)X9(6)V9(3)X |
ProprietaryDocumentIdentifier |
Unique identifier, i.e. a numeric value or alphanumeric value, for a business document. |
String |
1 |
|
|